rampage xb

Hello everyone I have some questions 1- What is the gears ratio in stock Rampage-XB ? 2- If I want to change gear for top speed change A + B + C + D gears or only A+B gears? 3- Where can I buy gears for top speed ?

If their is anyone with a real rear dom I need a few bits of info...1st off I need to know how long is the stinger and what's the ID of it as well. I have a clone pipe and I noticed that the stinger is not as long as the dom so all info would be great.

When they say its a lightened flywheel... How many grams of material has been removed on the standard lightened wheel.

Finally finished breaking in my XB (first 1/5 scale), vented the gas tank and took it out for a spin in the dirt at full speed :eek: Jumped this, spun a doughnut, zipped here and there. Then I heard a sound like a soda can being munched. Drove it in for a pit stop, engaged the gearbox with...

Well, I guess tomorrow is the day where Fedex guy is gona hit the bell, got the engine upgrade plus an Iridium plug. I have some of the flm screws waiting to be installed as well. Have to take the engine apart and clean it completely while at it. I have the 9500 rpm spring standing aside. I...

I got bored so I thought I'd do a rebuild on my XBE. I've been drool'n over the the other builds. While I'm waiting on my modified XB chassis, I thought I'd start on the XBE. I wanted to try some different motor/esc options anyway. I picked up the 7075RC chassis. Thought this was a good place...

Hi Is the cc 1717 -1650kv motor Direct fit on XBE or want Change motor mount? http://www.dollarhobbyz.com/traxxas-1-7-xo-1-supercar-1717-mamba-monster-motor.html Abdul

I'm having a bit of tiny problem; thing is when I try to steer the left/right, the corner of the DGI steering Links(due to their abnormal size) is hitting the 7075RC differential gear housing. I tried to decrease the EPA, and play with the length of the Links, I even shortened the servo link...

Installed the Racing Rampage XB Tuned pipe I have to say I much prefer it over the stock, also Just Adjusted my old Duratrax THunder Quake wheels to fit on my chimera, I like the width much better. Just had to dremel out the inside of the wheel a tab bit for them to fit and they ran pretty...

I see there alot of different options for ESC , just wondering what would be the best esc upgrade most likely going to stay with 6s power.

Got the box yesterday

So I was wondering, since I already installed a 8k spring with new clutch and lightened flywheel, what can I do next in order to get more bhps out of it? Does installing new Zenoah head help? Any upgraded engine parts for faster stroking and better compression? Maybe milling the stock engine...

Will this pipe fit the chimera? I'd like to try a straight pipe like this one http://www.trendtimes.com/710030.html?utm_source=googlepepla&utm_medium=adwords&id=67793804622&utm_content=pla&gclid=CIX-_dmFmL0CFeZAMgod-hYAdA

I got an order from Khemoe Foy, he owns UPT hobby shop in the Virgin Islands. He wants me to "fix up " a new XBE for him. He said to do whatever I want, just make it fast.... OK, I can do that, so here we go. He sent me a new car and I started with the front end. I added the SS sleeve's to...

6 mm, I been told they can be drilled to 10 mm, again I been told that don't know for sure. $ 60 shipped

Hey guys, once again I got a chance to get another run in. Now my set up is cy26, 31-29-26-24, tuned rear mount pipe, for now. So far I'm very happy with my xb and I haven't clocked it but now I'm guessing 43 to 45mph, and still have 2 more gear ratios to go. I'm now believing my magic number 55...

Has anyone upgraded from there stock battery to a lipo and if so did all the stock servos work fine with it and what battery did u use?

With the really cold weather I've broken a bunch of parts so I decided to convert my XB-E into a Baja. Still waiting on a few parts, but here is what I've done so far. I used the 7075rc chassis to lengthen the wheel base, Ramtech adapter so I could install some Pro-line bowtie tires and...

with the back pressure on tuned pipes and "exhaust eating" for reburn, i was concerned about coupler material i.e., silicone/heater hose being pulled back into combustion chamber. seems trivial but wanted general consensus on the topic. silicone is 10x the cost and is nice, but automotive...

Hey guys, got a little more run time and I'm liking the buggy but, the rolling resistance is high when compared to my baja 5b I mean it's almost like the brake is on when it's not. Is there anyway to fix this, I was thinking maybe the belt drive set up but I don't want to give up top end speed ?