• Welcome to RedcatRampageForum! Are you a Redcat fan? If so you're in luck as you've have arrived to the biggest and best RedcatRampage RC community.

    Come join our community and ask your questions, show off your Recat RCs and share your experience!

rampage xb

  1. Tvbest

    Redcat Rampage xB body

    Does anyone know where I can get a body for the rampage that isn't the solid red, blue, green? I really like the older bodies that looks like the body is tearing apart.
  2. D

    My Rampage XB will rev up but won't move

    I'm having so issue my car will crank rev up but wont move no where.
  3. Kevin's xb

    Four wheel drive to 2 wheel drive

    I took my front hex screw out to make it a two-wheel drive because my back tires are bigger which come on the truck but I have the XB buggy will it hurt anything to run just 2 wheel drive
  4. Kevin's xb

    WHAT TIRES CAN I GET TO MOUNT ON MY GAS XB MYSELF.

    Can't find any all-terrain tires that fit the xb rim. Does any one know of any tires that are any better than factorys b.c. they only lasted 2 weeks from first stay and I'm not a crazy driver. But anyways HELP from the xb family. Any tire I will take any answers at this point.
  5. roc3rd

    New rig on the scene

    New to the site I just purchased rampage xb for a steal, needed a few touch up but good to good. It has a bunch of aluminum upgrades, but I'm looking to install chimera cage possible dominator pipe. My question is will that pipe bolt up to my xb, cause I only see option for jetpro. Any info...
  6. Petrolheadz100

    Chimera parts compatability with xb and mt??

    Are the parts for the XB and the Mt compatible with chimera? I have been trying to find parts and have not had any luck only parts for the m m t and x b
  7. T

    Servo repair via monoprice select mini 3d printer

    I have been having issues with the servos on my xb. And to top it off I haven't been able to get a replacement for the steering servo as most hobby shops don't normally keep them in stock. I was able to get a savox sa-1231sg which is a 1/10th scale servo with a torque rating of 444 ozin at 6v...
  8. A

    BQLZR shocks on a Rampage XB

    I bought a front and rear set of BQLZR shocks for my XB off of EBay recently, and have been super happy with them so far after 2 months of run time. The springs are stiffer than the stock shocks, and so far no blowouts or leaks! They are really well made, and the best part is they only run $20 a...
  9. A

    Lois Desert Buggy XL wheels on Redcat XB

    If I'm using the RamTech HPI wheel adapters, can I use wheels from a Losi Desert Buggy XL on my Rampage XB?
  10. H

    Rampage XBE motor mount options?

    Hey all, I'm new to this forum. I'm looking for information on motor mounts for the Rampage XBE. I noticed Kershawdesigns.com is down for good, I saw the 7075RC motor mounts but are there any others out there? I have a leopard 5692 waiting to be installed :) PS - General question, what are...
  11. MSLR

    My XBE

    Hi all Thought I would share some photos of my XB-E. It all started standard until I blew the motor so it was time to be modified Starting from the front Standard and steering servo still standard Motor is a sky rc toro beast 910 kv and esc is a hobbywing max 5 Motor mount is one I made with the...
  12. B

    XB-E batteries!?!?

    Can i upgrade my (2) stock Hexfly 3900 Lipo 11.1V 25c's on my Redcat Rampage XB-E for (2) Turnigy 5.0 (5000mah) 2 cell 7.4v??? I noticed that it says above in the thread that it will fry the servos, but the Redcat Hexfly upgrade sheet lists a HX-580030C-BV2, 5800mah, 30C, 7.4v lipo battery as an...
  13. MSLR

    Replacement Rear diff case for XBE

    Hi all Is there a upgraded rear diff case besides the 7075 rc available for the xbe, as you all know the standard rear diff case is not very good especially with the input bearing heating up and then spinning in the bearing housing :mad: Look forward to your answers and suggestions Cheers
  14. mailmanx

    XT-E, Durability Similar to XB-E?

    I've been driving brushless 1/8th scale rigs for two years. Recently, I became intrigued with a bigger rig after watching videos of the Traxxas X-Maxx. However, I believe that the X-Maxx is over-priced and under-built. I was especially turned off by how much of it is proprietary. I love to...
  15. EliteScope

    XB transmitter control issue

    Hi guys just wanted to ask for some advice... just this evening i was going to run my XBs out but as soon as i turned on my radio then car, i noticed that i wasnt getting any feedback..well propper feedback that is. When i turn the wheel, i don't get any steering but when i pull the trigger, the...
  16. EliteScope

    My 2 XBs won't start.

    Good evening to all, Im new to the 1/5 scale world. But i just recently aquired 2 used XBs (pictured on my profile lol). Anyways i got them about a week ago...ran them a few times with what fuel it had in them. Then cleaned them up, with some WD40 as i seen on some videos. The only area i did...
  17. MSLR

    Running Hpi 5b rear wheels

    Hi all I am after information / comments on running hpi 5b rear wheels on the front and rear on my xbe. Currently I have been running with the standard xbe wheels on a 8s ( hobbywing max 5 200amp/ toro beast 910kv ) set up using a 12t pinion with my motor temps running at 50 degrees. My...
  18. F

    Aluminum shock mounts

    Can anybody explain to me how to mount the Aluminum shock mounts (part#710031) on an XBE? I thought they would replace the stock mounts on the lower a-arm but can't seem to figure out how to mount them. Thanks in advance!
  19. D

    Rampage XB - Next mods?

    Hello everyone. So far it has been fun tinkering with my Rampage XB over the last 9 months. I am looking for everyone's recommendations on what I should modify next. Here is what I currently have: - HY 30cc 4-bolt engine - Jetpro pipe - Blue Aluminum Gear Plate with Bearings - Stern...
  20. MSLR

    What motor to run

    Hi all I have just installed the max 5 200amp esc and going to running a 8s set up. My question is what motor to run in the xbe and pinions. I like the leopard LBP58110/3D as its rated 210 amps. I know its a loaded question but before I spend my cash I need some direction. Any advice would...
Top