strodedawg
Senior Member
- Messages
- 302
- Location
- Philadelphia, pa
here is my build so far
parts list
7075 rc
diff cases front and rear
c-hubs
front knuckles
rear hubs
towers front and rear (modified from standard)
steering rack
stand up servo mounts
custom motor mount
custom layout
Baja wheel adaptors (wheel nut version)
Team Losi Racing
losi five-t center diff/mount with lightened outdrives
Losi five-t shocks front and rear
Losi five-t turnbuckles and rod ends all around
Losi five-t steering link
Kershaw Designs
Custom wound springs
Redcat Racing
aluminum steering plate
aluminum bits on wing mount
HPI
Gunmetal wheel nuts
White Baja wing
Rc-monster
Custom Battery tray (modded)
hardened 15t pinion gear
TBR racing
Rear skid plate
Modded front bumper
Fastlane Maching
HD driveshaft kits front and rear w/ HD diff cups
DGI racing
outdrive savers for center drivescups
GRP
Bulldog front tires for Baja 5b front and rear
Grafil
Xb-e body
Electronics so far
Hitec Hs-5765mh servo with DDM servo arm (until servo saver is ready)
Trackstar 1/5th 730 kv motor
Nanotec 8s 5000 mah 65-130C lipo
Futaba 4pl
still need to do:
driveshafts (on the way) and diffs
mount body
receiver box and lipo
get an esc
parts list
7075 rc
diff cases front and rear
c-hubs
front knuckles
rear hubs
towers front and rear (modified from standard)
steering rack
stand up servo mounts
custom motor mount
custom layout
Baja wheel adaptors (wheel nut version)
Team Losi Racing
losi five-t center diff/mount with lightened outdrives
Losi five-t shocks front and rear
Losi five-t turnbuckles and rod ends all around
Losi five-t steering link
Kershaw Designs
Custom wound springs
Redcat Racing
aluminum steering plate
aluminum bits on wing mount
HPI
Gunmetal wheel nuts
White Baja wing
Rc-monster
Custom Battery tray (modded)
hardened 15t pinion gear
TBR racing
Rear skid plate
Modded front bumper
Fastlane Maching
HD driveshaft kits front and rear w/ HD diff cups
DGI racing
outdrive savers for center drivescups
GRP
Bulldog front tires for Baja 5b front and rear
Grafil
Xb-e body
Electronics so far
Hitec Hs-5765mh servo with DDM servo arm (until servo saver is ready)
Trackstar 1/5th 730 kv motor
Nanotec 8s 5000 mah 65-130C lipo
Futaba 4pl
still need to do:
driveshafts (on the way) and diffs
mount body
receiver box and lipo
get an esc