Chapel Hill fpv
Member
- Messages
- 19
Welcome to RedcatRampageForum! Are you a Redcat fan? If so you're in luck as you've have arrived to the biggest and best RedcatRampage RC community.
Come join our community and ask your questions, show off your Recat RCs and share your experience!
I just got in a new clutch for my MT, a 8 shoe race clutch by miponline . From overall looks it's promising. Will let you know once it installed and tested. View attachment 13762
Looks really good, I don't like how the MT doesn't have much clearance though. It would be nice if they could get the body up off the ground or put even larger tires on it.
Any idea if those MT tires will fit my Rampage XBE?
Not sure but I'll get mesurments and let you know, meanwhile check out the clutch in place. The results of this clutch were awesome. When the clutch engages there is no slippage at all and in fact it wants to pick the front end off the ground. My next project is the 2 speed transmission I found. This should allow it to actually get the front end off the ground.
Did you have to buy a different clutch bell as well to use the new clutch or is it still stockNot sure but I'll get mesurments and let you know, meanwhile check out the clutch in place. The results of this clutch were awesome. When the clutch engages there is no slippage at all and in fact it wants to pick the front end off the ground. My next project is the 2 speed transmission I found. This should allow it to actually get the front end off the ground.
Been wondering about these clutches being used in the MT. What RPM is the clutch engagement?Not sure but I'll get mesurments and let you know, meanwhile check out the clutch in place. The results of this clutch were awesome. When the clutch engages there is no slippage at all and in fact it wants to pick the front end off the ground. My next project is the 2 speed transmission I found. This should allow it to actually get the front end off the ground.
Nice but I have to be honest, I know nothing about gas/nitro RC cars.
I was talking more about getting the entire body off the ground further in order to make more clearance, not really popping wheelies
Been wondering about these clutches being used in the MT. What RPM is the clutch engagement?
Did you have to buy a different clutch bell as well to use the new clutch or is it still stock
How do you like it?I got the 7000 but they had a 8000 that matches the original rpm engagement.
It is awesome, when it kicks in it kicks hard. I have had no fade at all even though I found my breaks we're dragging. It smoked the breaks before I realized they were dragging.How do you like it?
What model clutch did you get?I just got in a new clutch for my MT, a 8 shoe race clutch by miponline . From overall looks it's promising. Will let you know once it installed and tested. View attachment 13762
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Redcat Rampage RC community for Redcat RC enthusiasts that covers all aspects of the Redcat brand!
Register Today It's free! This box will disappear once registered!