2 tanks of xt and motor seized

[RampageHopUps]

Probably a piece of the flywheel on the back end chipped off and got caught.

 

[Rs4 tony]

Possibly. Never dealt with anything like this. So I'm surprised.

 

[rcgasser]

Thanks a lot for the quick answers and tips. Really appreciate it.

No problem at all that's what the forum is for glad I was able to be of some assistance.

 

[sdmaker]

I would double check the tuning on your high speed needle anyway. 3/4 turn out may be a bit on the lean side.

 

[Rs4 tony]

No it's a full 360 and a 1/6th turn. Blue smoke is present which is good

 

[sdmaker]

No it's a full 360 and a 1/6th turn. Blue smoke is present which is good

ahh ok. should be good then. guess i miss understood you.

 

[Rs4 tony]

Yea I'm sorry. Idk how u guys count a turn As in 180 or 360 degrees. Confusing. And why does the coil thing get caught up? Just a random but normal thing?

 

[racetruck]

Welcome to the forum it could have been a rock stuck under the flywheel

 

[Rs4 tony]

So what tuning setups do you guys use since we're on a motor thread? How many turns out from closed.

Key: 1 turn = 360 degrees

 

[racetruck]

i run my carb 1 full turn 360. plus 1/8 of a turn on the low side. the high is 1 full turn out plus 1/16. with lucus 2 stroke oil 5 oz of oil to 1 gal of gas my engine is a stock 26cc and stock carb with a cpi tuned pipe on the MT