shocks

which nutech shocks fit best, the smaller tb2 ones or the newer larger mt/tb3 shocks?? and also,,, I believe you will run front shocks all the way around

Well, here's some pics with the brace on and trimmed body. After seeing all the bent tower pics recently, I decided to install it. Did a crappy job and was off over a quarter of an inch trimming the body...oh well.

Purchased this MT here on the forums, just wanted to post an observation as I was going over it, the suspension @rear of the truck would stick at full compression so I went through it to try and figure out what was going on. I think I figured out part of the problem and am curious if anyone...

I want a better set of shocks. What are you guys buying or doing the shocks. My buggy bottoms out very easily. I have read about different oils and spring. I am just a basher. Big air and flat runs is how I run the buggy. So I would like to know what people have found that works best.

Hey Guys, Was curious how you guys setup your shocks for off road bashing and jumping. I am having an issue with the XB always wanting to nose dive off jumps. I run a 1/8 rc8BE and throttle and brake control angles but throttling doesn't bring the nose up at all and braking is usless since its...

I broke a front shock on my Xt the other day and I ordered the upgrade ones that it shows in the manuel the 710015 Front "Resil" shocks gunmetal. I see they look different than the stock ones do they still fit or what do I have to do to get them to work? I haven't tried to install them yet I...

anyone know how to get this little piece out so I can put it in the new aluminum shocks.

I'm looking for BigBore Shocks for my Xb-e, anyone? ( probably 5b will fit ).Where is the cheapest price new?

Before I go and order aluminum shocks I thought I was ask if there is a big difference between the stock and aluminum?

which mt shocks for the xsc?,, ic the original version for the v1/v2,, which i have seen on sale at few places,, and the v3's which are more expensive,,, ,,, which ones are the rebuildable ones,, and do i just buy fronts and rears,,,,??? or four rears,, etc,,, since im gonna be running phatcat...

Hi all, new to the forum. I just bought a used xt. Front shock shaft is broke. Should I buy 4 new shocks if so what kind and size? Or just replace with a new stock one? It seems all stock and runs great, I plan on running it on the local BMX track.

So im having trouble getting the shock caps off any ideas? I saw a post about a guy milling a flat spot. Being I don't have a mill what else can I do? newb here

I know there is a ton of info on shock bleeding but i cant find any procedure on the aluminum shocks with the side reservior. any info would be greatly appreciated thanks J.T

I bought baja front shocks for my tt project. When I went to put on the bottom perch of the shocks was getting pushed up from the suspension arms, Is there somoething I need to take off my old shock like ball ends or something. Something this dumb I didnt think about. Thanks guys

Will these fit on the XSC? The stock shocks for the baja 5t i believe... Lookin for shock upgrade suggestions. Anyone got any?

Anyone out there running tb2 shocks on cats?- The tb2 shocks pistons have quite a lot of shock piston to shock body clearance- too much. Try this with the stock 4 hole pistons- Losi silicone diff fluid. 2000 weight. This really improved my shock action, A hard basher running big heavy tires...

What are the lengths of the front and rear shocks for the xbe? Will the baja shocks fit on xbe? If so the fronts or rears?

Are the Redcat 710015 and 710016 upgrades? Aluminum body shocks. If not what do you suggest I use? I broke a front factory shock on second tank after hitting a small dirt mound for a jump. Thanx

I see losi is selling oil in 4oz bottles now b/c of the 5ive. Anyone rebuild the stock shocks and remember how many bottles it takes? Is there better source for oil in this quantity...

As information seems to be scattered around, I felt that would be nice to consolidate it in a single topic. Facts: - Internal body diameter is 16mm. - They have a lot of lateral play on the shaft, probably because the pistons are too small. - Stock pistons have 4 holes. - Stock oil is...