TAHA_Da_Gr8
New Member
- Messages
- 1
Hello all, I bought the aluminum spindles (pn:710013) & front caster blocks (pn:710010) with the associated hardware (can't find the pn for this part) for my XBE cause I tore apart my original parts trying to get them apart. Anyways my issue is, when I tighten the top and bottom screws on the assembly, the spindle will not rotate freely due to the force compressing upon spindles from the caster blocks. If I back the screws back a little to free up the spindle, the screws will back out cause they don't have any tention. So how are you guys using the upgraded spindle and caster blocks for the xbe? I also tried the red thread lock but that still didn't work.
