Chief409
Senior Member
- Messages
- 708
- Location
- Rosamond, CA
Just got the silicon tube I ordered from Silicontube.com to run the exhaust past the wing from the X-Can. The tubing wall is lots thicker then I thought it would be, and 4 ply. Plus, it's soft. I WAS thinking I could use the tubing to tune the exhaust a bit, but... With the wall thickness, and the softness, I doubt it. Too thick, too soft. I think the best I can expect is keeping the back pressure down. I'll find out this weekend.
HOWEVER, it will keep the exhaust off the wing! And look good doing it. The blue cover of the tubing fits in well on the DR and the blue X-Can!, and the exhust noise should be lower
HOWEVER, it will keep the exhaust off the wing! And look good doing it. The blue cover of the tubing fits in well on the DR and the blue X-Can!, and the exhust noise should be lower
Last edited by a moderator: