forist
Contributor
- Messages
- 760
- Location
- Owosso Michigan
Anyone know the thickness of the stock base gasket. thanks for any help.
Welcome to RedcatRampageForum! Are you a Redcat fan? If so you're in luck as you've have arrived to the biggest and best RedcatRampage RC community.
Come join our community and ask your questions, show off your Recat RCs and share your experience!
how do you get a .12? split the paper gasket or something? is better to have the timing/porting line up or the extre compression? im working on a stock 23 and was thinking about getting the squish down some, but wasnt sure how.Sucram said:20 thou is the closest.
If you have a stock top end you can go to 12 thou but it puts your port and transfer timings off a bit.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Redcat Rampage RC community for Redcat RC enthusiasts that covers all aspects of the Redcat brand!
Register Today It's free! This box will disappear once registered!