Servo question

[teedog12]

I'm looking for a servo arm kit that you can put both arms on one side of the throttle/brake servo,(air filter clearance). I have Hitec servo's, is there a kit or home made? A link would be great.


Thanks Coleman

 

[REVOlutionary Rampage]

I haven't heard of a kit like that. But, there could be one out there. I've heard most people just use an angled shreadstack or something like it to get clearance.

="http://www.largescalerc.com/phatdad-openplenumshreadstack.aspx"]http://www.largescalerc.com/phatdad-openplenumshreadstack.aspx

="http://www.redcatrampageforum.com/showthread.php?t=6534&highlight=angled+shreadstack"]http://www.redcatrampageforum.com/showthread.php?t=6534&highlight=angled+shreadstack

 

[teedog12]

Like this, http://i294.photobucket.com/albums/mm87/Obeast44_bucket/XB005.jpg

 

[Guest]

No specific kit that I am aware of. You can use a single sided servo arm or just cut one side off. Just use two of the holes on the arm.

 

[teedog12]

So is that one arm with "2" link running off it, its had to tell.

 

[RampageHopUps]

You can buy a Team Twisted linkage from DDM and cut the Rods down to size.

 

[Deluge]

Just use a two arm servo horn and cut off one side, then move the linkages.

Here's a better example...

DemonRC Linkages

 

[teedog12]

Thats it, didn't know how, but I do now!

Thanks Coleman