Kevin's xb
Well-Known Member
- Messages
- 65
Thanks I'm gonna go to local hardware store today. Thanks phill, after tubing just waiting on hex wheel hubs to start the swithch. Does the ID mean inner diameter on the tubing.This is what you need
10mm ID with 1mm wall thickness = 12mm outside
https://www.ebay.com.au/itm/Brass-T...hash=item1c98afcc21:m:myjHo3IO2NmEAvM9ltJxamA
Hopefully you can get it locally.
I got some 8mm for my belt drive but had to order on ebay