help im lost rampage mt pro v3

[rampage pro 1st 5th]

Ok so I traded a losi after shock pulling truck for 3 boxs of screws bolts and parts and was told its a rampage mt so it was missing a arm and hubs and pipe and servos and tires so I get it all together and its a rampage mt pro v3 with a zenhoan 30.5 well one of the dual servos went out so now im down to one. But seems as the the servo savers heave slop in them but there tight. What kinda screw or bolt do they uses dose it go all the way through. It and I have the single servo. Servo save setup rite now I just unplugged the bad one and took the arm off. I guess what I am asking is is it ok to run it that way or do I need to put the single servo setup in it oh and I have a futaba s3305 for throttle brake is that ok. Sorry this my first 1/5 and being it was as tore apart as you could get it in doubting my self in how I put it all together

 

[krashkrieg]

Here's the manual, might help with how to put some of it together.

http://content.yudu.com/Library/A17zox/RedcatRampageMTandTT/resources/index.htm?referrerUrl=http://yudu.com/item/details/57090/Redcat-Rampage-MT-and-TT-Manual

ALSO

get a better throttle brake servo, that one can easily jam up and get a killer bee kill switch...

If it's the stock steering servo, you should upgrade. One will not turn wheels much.

 

[rampage idiot]

Ok so I traded a losi after shock pulling truck for 3 boxs of screws bolts and parts and was told its a rampage mt so it was missing a arm and hubs and pipe and servos and tires so I get it all together and its a rampage mt pro v3 with a zenhoan 30.5 well one of the dual servos went out so now im down to one. But seems as the the servo savers heave slop in them but there tight. What kinda screw or bolt do they uses dose it go all the way through. It and I have the single servo. Servo save setup rite now I just unplugged the bad one and took the arm off. I guess what I am asking is is it ok to run it that way or do I need to put the single servo setup in it oh and I have a futaba s3305 for throttle brake is that ok. Sorry this my first 1/5 and being it was as tore apart as you could get it in doubting my self in how I put it all together

If those are the stock steering servos one is not gonna get it! Alot of guys run dual hitec 5755's I and a few others run a single Hitec 5805 and I love it!

 

[rampage pro 1st 5th]

Servo is on the list. And ill see if I can fine somthing better than the futaba I have a savox in my hyper 7 Nitro I might switch out for the throttle break

 

[rampage pro 1st 5th]

few picscant seem to get the front whee3ls frome leaning ive tryd everything i know starting to think the bottom front a arms are too short





















/monthly_2013_01/2012-12-30_17-56-08_959.jpg.1af0ebc8a118eb86f3f1d5ae02725f3e.jpg

/monthly_2013_01/2012-12-30_18-11-27_87.jpg.46be42ee6f6ddcc86a7920151838c7bd.jpg

/monthly_2013_01/2013-01-02_12-56-19_988.jpg.40b6d1ba9c79211396d63ffa71227aa7.jpg

/monthly_2013_01/2013-01-02_12-58-39_308.jpg.d304268a46ec0d82c55faf88d371dafe.jpg

/monthly_2013_01/2013-01-02_12-58-58_887.jpg.c789c6b1400dc6d1f77f9222d958198f.jpg

 

[rampage pro 1st 5th]

this is a mt not a tt rite like i said it was all in boxes tore apart i was shocked to find out it was a $1200 truck and i traded a $300 nitro for it

 

[rcgasser]

You just have to take some of thetoe out to straighten the whell up turn the turnbuckle on top of the arm to adjust.

 

[rcgasser]

The MT and the TT is the same just different tires wing, bumper rear and front and the gearing.

 

[rcgasser]

It will also turn alot better if you upgrade the battery to a venom 5000 and change your front diff oil to a lower number

 

[rampage pro 1st 5th]

Yea I've got it as tight as I can get it and the toe still is funny like I was saying. Maybe the front lower a arms are wrong anyone know how long they should be. Yea a battery up grade is on the list

 

[rcgasser]

You can get more room if you cut the ends some.

 

[rampage pro 1st 5th]

Cut the ends of the two way adjustment screw rite

 

[rcgasser]

Yes you should cut both ends to keep it even.

 

[rampage pro 1st 5th]

Ok. Ill. Have to get a saw as I don't have any for cutting metal

 

[rcgasser]

A dremel works best.

 

[rampage pro 1st 5th]

I was thinking I might have tt front lower a arms

 

[rcgasser]

Its the same arms the MT and the TT I am not sure with the metal arms. If that makes a difference or not.

 

[rampage pro 1st 5th]

Odd then is this a common problem

 

[rampage idiot]

From looking at your pics the only thing I see that could be wrong are you sure you don't have the rear upper control arms on the front? the rears are about an inch longer than the fronts

 

[rcgasser]

But then would that not make the rear off?