rookie101
Senior Member
- Messages
- 375
- Location
- Alberta, Canada
Just received my bearing holders and HPI wheel adaptors, these things are little works of art! 
I only had three runs on my XBE and thought I would change them just as a bit of preventive maintenance. Turns out three of the bearings had already self destructed! Sure glad I read through this forum and decided to do the upgrade before I had any issues in the field.
Also noticed when I had it apart that one of the set screws for the cross shaft in the CVD had backed out, so both of those got loctite and retorqued. Make sure you check those guys.
Awesome parts man!
Oh and thank you for shipping to Canada!
Aaron
I only had three runs on my XBE and thought I would change them just as a bit of preventive maintenance. Turns out three of the bearings had already self destructed! Sure glad I read through this forum and decided to do the upgrade before I had any issues in the field.
Also noticed when I had it apart that one of the set screws for the cross shaft in the CVD had backed out, so both of those got loctite and retorqued. Make sure you check those guys.
Awesome parts man!
Oh and thank you for shipping to Canada!
Aaron
Last edited by a moderator:
