• Welcome to RedcatRampageForum! Are you a Redcat fan? If so you're in luck as you've have arrived to the biggest and best RedcatRampage RC community.

    Come join our community and ask your questions, show off your Recat RCs and share your experience!

Cvd loctite process assistance please

westsiderkg

Well-Known Member
Messages
64
Fellows,

Read through a few threads but could use a bit of guidance from someone who has done this and any pics or diy guides appreciated! Don't want them slipping out. Thanks!
 

metal finisher

Contributor
Messages
154
Location
green bay wi.
# 1 Quality Allen drivers. Ok what I do remove set screw degrease take apart cvd find where set screw made Mark in shaft put on safety glasses and take Dremel and make a small flat area on shaft not much tho. Reassemble cvd Put drop of blue locktite on set screw kind wipe off excess put screw back in nice and tight. Now if you take apart always use heat first then take out set screw
 

westsiderkg

Well-Known Member
Messages
64
Thanks. Do me a favor and snap a pic of the set screw location when you get a chance. Not seeing it.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Members online

No members online now.
Top