Search results

Its fairly easy. 9 screws and the whole rear end assembly comes off. I used blue fuel line to match the truck. don't mine the disarray. In the process of replacing the clutch

i purchased mine on the German eBay. There were 2 kits available from Stern CNC. The V5 kit which is a 1:1 gear ratio for $100 and the V8 which has multiple gear ratios for $140. You also need to have the square gears not the 4 pin gears. if you have the aluminum gear plate, its all you need...

you might be S.O.L. the seller radicooluk doesn't ship to the US anymore here is a clear unpainted from ApexModels http://www.apexmodels.com/gbu0-prodshow/MAV-MV24188.html Its on Ebay for $109.00+ but the shipping is more than 19 days out

you might be S.O.L. the seller radicooluk doesn't ship to the US anymore here is a clear unpainted from ApexModels http://www.apexmodels.com/gbu0-prodshow/MAV-MV24188.html Its on Ebay for $109.00+ but the shipping is more than 19 days out

The wing mount doesn't come with hardware and you have to get a little creative with the top location of the wing mount. Just a longer screw from the oposite direction. I found all the hardware from my local ACE hardware store.

I only like the closed TT body. Took me 2 weeks to find a closed body

Ive found some of the only "TT" bodys available. The only thing is... they are HPI blackout XB bodies. There is 1 clear untrimmed body on EBay but the shipping time is longer than the return policy for about $65 with $30 S/H. They have painted ones that are the stock HPI Blackout XB bodies for...

I ordered my body from the UK. There was an untrimmed clear body for $100 but the lead time on it was more than 1 month. It is a maverick Blackout xb body. The one I purchased was the stock body that comes painted but it's the only body that comes with the top still on it

The pipe being close to the body isn't the issue, the issue with that pipe is while running, the exhaust will begin to melt the corner of of the bed. Before I switched to the Dom pipe, I attached a 6 inch piece of silicone tube to the end and routed down through the rear bumper

Reinstall the front mounts and raise the rear mounts, and just take the wing off and the wing mount will fit right under the body

Looks Nice!!! Finished my Conversion

*Update The transformation is complete. Its not a MT, Its not a XB, Its not a TT, Its my MB!!

Update on my MT to TT conversion. Received some parts in... Have a look took some doing, the wing parts do not come with screws so off to the local ACE hardware store for all the screws i needed. Have the wheel adapters for a set of Rovan Knobby rear tires but im going to stick with the MT...

i used a reedy voltage regulator with a 5000mah receiver battery. no settings necessary, just plug and play

@Phill @G-Man Ive found some of the only "TT" bodys available. The only thing is... they are HPI blackout XB bodies. There is 1 clear untrimmed body on EBay but the shipping time is longer than the return policy for about $65 with $30 S/H. They have painted ones that are the stock HPI Blackout...

@redthomas there is a video with an MT pulling wheelies, a gas MT check this out if you read down in the comments, he tells all the gear he is running

@Boomkidd @designed2survive not for sure if this is ok for a redcat post but here goes... If you look for the Maverick Blackout XB by HPI, which is discontinued, but there are still lost of parts out there. This is a similar build to the MT/TT design. Designed2survived help clarify whether the...

you can run a tuned silencer on it but the pipe becomes a little extended IMHO. or a silenced CPI tuned pipe

i've heard the stern drive does lower the low end but i plan on converting mine to a TT. I wasn't too impressed with the MT Pro pipe on mine. Heard lots of good reports on the Dom pipe for low end and top end. From the stock can to the MT Pro pipe, it just seemed to get louder. not to much...

Thanks for the info. ill have to go with the alternate Rampage TT wing mount. Just looking for options. the TT parts are hard to find without going to europe to locate M****** B******T xb parts. the rampage xb parts bring the wing up and out to far for my liking. plus, the XB rear shock tower is...